Are your Toilet Repair services available in Ann Arbor?

Yes, Masters Plumbing Service provides round-the-clock Toilet Repair services directly in Ann Arbor, MI.

How much does emergency service cost in Ann Arbor?

We offer upfront, transparent pricing with no hidden fees for all service calls in Ann Arbor.

🚽 Running · Rocking · Clogged · Won't Flush

Toilet Trouble in Ann Arbor, MI? Masters Plumbing Service Has the Parts and the Answer

Name: Masters Plumbing Service
Telephone: +1-855-718-1500
Price range: $$
Rating: 4.9

Toilets fail in specific, diagnosable ways. The running sound after a flush, the phantom flush that cycles with no one in the bathroom, the wobbly seat, the bowl that won't clear with one flush — each one points to a specific component. Our techs in Ann Arbor diagnose the actual cause and fix the specific part that failed.

📞 Call +1-855-718-1500 — Same-Day Service

Fill Valves & Flappers Wax Ring Replacement Clog Clearing & Auger Full Toilet Replacement

Licensed Toilet Repair service in Ann Arbor, MI - Masters Plumbing Service

Why Call a Plumber for Toilet Work

4 Reasons Professional Toilet Repair Beats DIY in Ann Arbor

A rocking toilet that's dismissed as a loose bolt and tightened without replacing the wax ring will continue letting sewer gas into the bathroom floor cavity. The right diagnosis matters.

🔎

Accurate Component Diagnosis

We dye-test, fill-rate-check, and measure tank refill time to identify exactly which component is causing your toilet's symptoms. A running toilet can be caused by a worn flapper, a misadjusted float arm, a failing fill valve, or a cracked flush valve seat — each with a different repair. We find the right one.

📦

Parts On the Truck

For toilets where the flush valve seat is chipped or the porcelain tank has cracked, we also carry compact replacement toilet units in standard rough-in dimensions.

💧

Wax Ring Work Done Right

A common mistake is resetting a toilet over a partial old wax ring or onto a damaged flange. We clean and inspect the flange, note any damage that needs addressing, and install the correct ring profile before reset. The toilet should not rock at all when we leave.

📋

Flat-Rate Pricing, No Hourly Surprise

We quote toilet work at a flat rate before any repair begins. Whether it's a 20-minute fill valve swap or a 90-minute toilet reset with flange repair, you know the price before we start. Our rates for common toilet repairs are published — ask for them when you call.

What We Repair

Toilet Repair — All Makes, All Symptoms

From a constantly running tank to a toilet that's been loose on the floor for years, here's exactly what our toilet techs address in Ann Arbor, MI.

Running Toilet

Fill Valve & Flapper Replacement

A running toilet is almost always caused by one of two things: a flapper that no longer seats fully against the flush valve (allowing water to trickle from tank to bowl), or a fill valve that won't shut off at the target water level. We dye-test to confirm the flapper seal, check fill valve shutoff behavior, and replace whichever component — or both — is responsible.

Wax Ring

Toilet Reset & Wax Ring Replacement

If the flange is damaged — cracked porcelain collar, corroded cast iron, or a flange sitting below finished floor height — we repair or shim the flange before wax ring installation. A wax ring on a damaged flange won't hold long-term.

Clogs

Toilet Clog Clearing

A toilet that won't clear with a plunger has either a tight clog in the trap or a blockage in the drain arm beyond the trap. We use a closet auger — a specialized toilet snake with a protective rubber boot — to reach through the trap and break or retrieve the obstruction without scratching the porcelain bowl.

Flush Valve

Flush Valve & Flapper Seat Repair

We can in many cases sand and polish a mildly damaged flush valve seat to restore the seal. When the seat is cracked or too severely scaled, we replace the flush valve assembly — either with a manufacturer repair kit or a universal replacement valve.

Tank Hardware

Tank-to-Bowl Gasket & Bolt Replacement

The bolts and rubber gasket connecting the tank to the bowl can deteriorate over years of service, leading to slow leaks at the tank base or a tank that shifts side to side. We drain and remove the tank, replace the spud washer (tank-to-bowl gasket), install new brass bolts with neoprene washers, and reseat the tank with correct torque to avoid cracking the porcelain.

Replacement

Full Toilet Replacement

We handle the full process: shut water, pull old toilet (including wax ring and flange inspection), set the new unit, connect supply, and verify flush performance and seal before leaving.

📞 Call +1-855-718-1500 — Fix It Today

Our Process

From Symptom to Fixed Toilet in 4 Steps

Here's how a Masters Plumbing Service toilet call plays out in Ann Arbor, MI from your first call to a quiet, leak-free bathroom.

Describe the Symptom When You Call

We ask whether you have a gravity-feed toilet (standard) or a pressure-assist model, which affects which parts we bring.

Component-Level Diagnosis

Dye test for flapper seal, time the fill cycle, check the fill valve shutoff height, observe the flush cycle, check for base movement, and examine the supply line and tank hardware. A running toilet is diagnosed in under 5 minutes this way — no guessing.

Flat-Rate Quote Before Any Work

If the diagnosis reveals a more involved repair than initially expected (damaged flange, cracked tank), we explain it before proceeding and re-quote accordingly.

Repair & Verified Performance Test

Approved repairs execute immediately. After completion, we run five flush cycles to confirm the repair holds — silent tank refill, no base movement, clear bowl, no water at the base.

Customer Reviews

What Ann Arbor Homeowners Say About Our Toilet Repairs

★★★★★

Master bath toilet had been running intermittently for months — I kept jiggling the handle. Masters Plumbing Service's tech diagnosed a deteriorated flapper seat and an aging fill valve that wasn't shutting off reliably. Replaced both in about 35 minutes. The toilet is completely silent now. The tech also found that my water pressure was running at 95 PSI — well above the 80 PSI max recommended — and adjusted the pressure regulator, which was stressing the fill valve in the first place. That kind of thorough thinking is why I called a plumber rather than just replacing parts myself.

— H. Nakamura, Ann Arbor

★★★★★

Toilet rocking at the base — I'd been told it was just a loose bolt. Masters Plumbing Service pulled it, and the wax ring had a void on one side from an uneven floor. They replaced the ring, used a flange extender to correct the height to the tile, and reset the toilet. Completely solid now and no floor staining at the base. Glad I called before a minor issue became a subfloor problem.

— W. Chen, Ann Arbor, MI

★★★★★

Water pooling at the toilet base had me convinced it was the wax ring. Tech traced the water to a corroded tank bolt — water was running down the outside of the bowl and pooling at the base without any leak at the floor seal. A 25-minute repair, not the toilet reset I was dreading.

— A. Williamson, Ann Arbor, MI

Trusted Toilet Repair service in Ann Arbor, MI - Masters Plumbing Service

Common Questions

What to Know Before Calling for Toilet Repair in Ann Arbor, MI

The dye test is the quick home check: put a few drops of food coloring in the tank and don't flush for 15 minutes. If color appears in the bowl, the flapper isn't sealing. That's your confirmation the toilet is wasting water.

If the toilet rocks after the bolts are tight, the wax ring has failed or the floor around the flange has deteriorated. We don't guess — we pull the toilet to confirm which it is and address both the wax ring and any flange damage we find.

Replacement makes sense when: the toilet tank or bowl is cracked (not repairable); the flush mechanism can't be rebuilt with available parts (some discontinued European-style units); or the toilet was manufactured before 1994 and uses 3.5–5 gallons per flush — modern 1.28 GPF toilets save significant water costs over time.

Frequent clogs on a toilet that's otherwise functioning normally usually come from one of three sources: flushing items that shouldn't be flushed (wipes, cotton products, feminine hygiene products — even "flushable" wipes don't disperse like toilet paper), a partial blockage deeper in the drain line that makes the fixture slow-to-clear, or a low-flow toilet that doesn't have sufficient flush volume to clear the trap and drain arm reliably.

We trace the water source before recommending a toilet pull. A small amount of food dye in the tank, combined with a dry towel at the base and a few flush cycles, tells us very quickly whether the water is coming from the flush or from the tank fittings.

We test every repair through multiple flush cycles before leaving. The extra 10 minutes of testing is the part that catches a repair that didn't seat correctly — which saves you a callback.

Toilet Trouble in Ann Arbor, MI? Masters Plumbing Service Has the Parts and the Answer